FOX 3F-RFP
The CSA Mod. FOX 3F-RFP Air Valve, is a full bore high quality single chamber double function combination air valve with a built-in anti-water hammer non slam surge prevention system. The air valve allows release of air pockets from pressurized pipelines, and admits large volume of air in the event of pipe draining/burst, to prevent vacuum and negative pressure conditions. During outflow the air valves senses the increase in air velocity and differential pressure using, if required by excessive values, the RFP (anti-surge) flat to control the air outflow rate thus avoiding fast approaches of water column with potential sudden closures of the mobile block and the risk of water hammer. Entirely made in ductile cast iron, with air release system and seat in stainless steel, FOX 3F-RFP stands out for its long lasting performances and reliability.
Anti-Surge Combination Air Valve
-
Body and cover in ductile cast iron GJS 450-10.
Air release system in stainless steel.
Floats in solid PP.
Seat in stainless steel.
Built-in surge prevention system.
Painting with fluidized bed technology RAL 5005.
-
Flanges size from DN 50 to DN 250 mm.
Flanges to AS 4087 or other on request.
Threaded 1" - 2" BSP F; NPT on request.
-
Pressure range: 10-16-25-40 bar.
Minimum working pressure: 0.2 bar.
Treated water maximum 60°C, higher temperature on request.
-
Design and testing according to EN 1074, AWWA C-512, AS 4956, AS 4020, WRAS.
-
-
-
FOX 3F-AS
The CSA Mod. FOX 3F-AS Air Valve, is a full bore high quality single chamber double function combination air valve with a built in anti-water hammer non slam surge prevention system. The air valve allows release of air pockets from pressurized pipelines, and admits large volume of air in the event of pipe draining/burst, to prevent vacuum and negative pressure conditions. The anti–shock mechanism, with adjustable nozzles, will control the air outflow rate thus avoiding fast approaches of water column with potential sudden closures of the mobile block and the risk of water hammer. Entirely made in ductile cast iron, with air release system and seat in stainless steel, FOX 3F-AS stands out for its long lasting performances and reliability.
Anti-Slam Combination Air Valve
-
Body and cover in ductile cast iron GJS 450-10.
Air release system in stainless steel.
Floats in solid PP.
Seat in stainless steel.
Anti-slam system in stainless steel with adjustable nozzles.
Painting with fluidized bed technology RAL 5005.
-
Flanges size from DN 50 to DN 250 mm.
Flanges to AS 4087 or other on request.
Threaded 1" - 2" BSP F; NPT on request.
-
Pressure range: 10-16-25-40 bar.
Minimum working pressure: 0.2 bar.
Treated water maximum 60°C, higher temperature on request.
-
Design and testing according to EN 1074, AWWA C-512, AS 4956, AS 4020, WRAS.
-
-
ARGO
The CSA Mod. ARGO Air Valve, for irrigation and treated water, is an automatic combination air valve that allows the release of air pockets during working conditions and the evacuation and entrance of large volumes of air during filling and draining operations.
-
Body and cap in glass reinforced polypropylene.
Float in polypropylene.
-
Threaded BSPT or NPT M 1" and 2".
-
Pressure range: 10-16 bar.
Minimum working pressure: 0.2 bar; lower on request.
Treated water maximum 60°C.
-
Designed and certified according to EN 1074.
-
-
ARGO 3F-RFP
The CSA Mod. ARGO 3F-RFP Air Valve, is a high quality single chamber double function combination air valve with a built in anti-water hammer non slam surge prevention system. The air valve allows release of air pockets from pressurized pipelines, and admits large volume of air in the event of pipe draining/burst, to prevent vacuum and negative pressure conditions. During outflow the air valves senses the increase in air velocity and differential pressure using, if required by excessive values, the RFP (anti-surge) flat to control the air outflow rate thus avoiding fast approaches of water column with potential sudden closures of the mobile block and the risk of water hammer.
Anti-Surge
-
Body and cap in glass reinforced polypropylene.
Float in polypropylene.
-
Threaded BSPT or NPT M 1" and 2".
-
Pressure range: 10-16 bar.
Minimum working pressure: 0.2 bar; lower on request.
Treated water maximum 60°C.
-
Designed and certified according to EN 1074.
-